New Mirrors for the Honda Pacific Coast

With the recent shortage of new old stock Honda Pacific Coast PC800 mirror assemblies, the price of used mirrors on eBay has gone through the roof. Luckily, Alex Ivanov from Russia has stepped into the gap and is offering most of the plastic parts for the mirror housing assembly for sale. He has developed molds of the mirror plastics that he can use to cast new mirror plastics for you on demand and mail to you.

I should note that I have not ordered any parts from Alex so I cannot speak to the quality of the prints or the timeliness of shipping. However, Alex has been around on the PC800 Facebook group for a few years now. The below information is from Alex. I have edited a few pieces of grammar to make it a bit easier to understand.

Also please note that the prices listed are from 2017 and ARE NOT CURRENT! They will give you a ballpark idea of the price but please email Alex directly to inquire about current pricing. He has had price increases on his raw plastic materials recently.

One other note: Alex’s first language is Russian. He writes pretty decent English but please don’t expect him to have perfect grammar or spelling.

If you wish to order parts from me, please send your orders details (needed parts, preferred payment and shipping etc) to my email pc800plastic@gmail.com (it’s much easier for me to keep orders info there).

Please specify the number of needed parts according to the above photo (1 – 5), because “I need the full mirror set” sometimes means “all pieces in the picture” or “all mirror pieces without the mounting plate” or even “all plastic without the glass.” Please, let’s save our time 🙂

Pricing (as of 2017 – prices are higher now due to rising cost of materials and shipping — in USD)

(1) Mirror housing: Left housing $50, right housing $50 [NOTE this is the 2017 price].
(2) Visor trim 8812(0/6)-MR5-003ZE (left/right). $15 each [NOTE this is the 2017 price] .
(3) Main bracket on which the mirror is assembled 881(1/2)2-MR5-003 (left/right) (it may be necessary to sand the mounting hole of the turn signal, because different mirrors have slightly different dimensions due to age-related deformations) – $50 [NOTE this is the 2017 price] .
(4) Fastening elements of the mirror glass 881(1/2)1-MR5-003 (left/right), the assembled set with the ability to adjust the mirror position. Note that I have no possibility of making the metal washer as in the original mirror, so I use some spring wire. It works pretty good after completely assembling the mirror. There may be some local defects on the outer edge, but anyway it will fix the mirror glass properly. $20 [NOTE this is the 2017 price] .
(4.1) Mirror glass – local glass workshops asked about $30 [NOTE this is the 2017 price] for one piece of cut mirror glass. Maybe it will be cheaper to make it in your local car mirror repairing workshops, if available. The glass can be installed in place warming up the plastic with a household hair-dryer (but the better way is to use an industrial dryer or go to a car mirror repair workshop).
(5) Mounting plate for fastening to the motorcycle 881(3/4)1-MR5-003 (left/right). The hooks that fix the washer-holding-plate are almost always partly absolete (see photos), but a strip of scotch tape solves the issue for the life of the motorcycle. $20 [NOTE this is the 2017 price] .

To be 100% happy you’ll need a turn signal, a safety wire, spring (toothed) washers of the mirror fastening to the motorcycle and the correct fastening hardware. In other words, you need your broken mirror assembly to harvest specific metal parts and the turn signal lens assembly from.

Shipping for one full set to Europe with regular post is about $15-20 [NOTE this is the 2017 price] . To USA – about $30-35 [NOTE this is the 2017 price] .

I use two ways of payment:
a) direct pay by PayPal;
b) special lot at Ebay with ordered parts, again paying by PayPal, but with extra 10% Ebay fees, customer guaranties etc.
Of course i’m open to your suggestions.

It usually takes me about 5-7 days to make the parts if I am out of stock, if I’m not lacking of materials – those plastics are imported and sometimes local dealer have customs troubles for weeks…

Please send me your order details (needed parts, preferred payment and shipping etc) to my e-mail pc800plastic@gmail.com. Once again – please specify the numbers of needed parts according to the above photo (1 – 5), because “I need a full mirror set” sometimes means “everything in the picture” or “all the mirror plastics without the mounting plate” or even “all plastics without the glass”. Please, let’s save our time 🙂

PS: I also make bumper covers which are about $50-60 [NOTE this is the 2017 price]

Alex Ivanov